Insulating small attic area through eaves

This one's a homeowner forum post, not a news story, but it points to a common attic headache worth knowing about.

The homeowner had their attic insulated and air sealed with cellulose, a loose-fill insulation blown in place. But a small area above the kitchen, roughly 50 to 100 square feet, got skipped because it wasn't ready for work at the time. That section connects to the rest of the attic only through baffles, which are channels stapled under the roof decking that keep airflow going from the eaves (the roof edges that overhang the walls) up into the attic for ventilation. The homeowner already air sealed the top plates (the wood framing where the walls meet the attic floor) in that spot and is asking whether it's worth also sealing the seams in the drywall below, and whether to fill the gap with cellulose or spray foam that expands to fit tight spaces.

The bigger snag: now that it's a small, leftover job, insulation contractors aren't calling back. They'd rather take on bigger projects.

If your own attic has a similar leftover pocket, a small unfinished area above a kitchen, dormer, or addition, this is the kind of gap that can quietly leak heat and air even after the rest of the attic gets sealed and insulated. It's worth checking whether small sections got missed during past insulation work, since those spots can be harder to get a contractor to return for once the main job is done.